LCD SMD термовоздушная паяльная станция YIHUA-995D/995D+, Паяльная станция с источником питания YIHUA-853DA/853D/853D+, Продукция YIHUA

Главная
Продукция YIHUA

Продукция YIHUA

1. Тачскрин-дисплей сепаратор YIHUA 946A/946A(II)
3. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.
  The heated aluminum is smooth and flat, ensuring a uniform surface temperature.

1. Устройство для расклеивания дисплейного модуля (сепаратор)
3. The LCD separator machine is designed to separate the smartphone from the LCD touchscreen. It uses a PID programmable temperature control system for a simple temperature adjustment with a stable performance and minimum tolerance. It uses a 5V/2A USB port, and supports smartphone charging for iPhones, Samsung, Xiaomi, Huawei and other prominent brands.

1. Тачскрин-дисплей сепаратор YIHUA 946D-III
3. With PID programmable temperature control technology and the highest precision PID input program, temperature is both adjustable and stable while deviations are minimized.

1. Высокочастотные паяльные станции с электрическим отсосом YIHUA948D/948D
3. The high-frequency soldering station adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of actual desoldering gun and soldering iron temperatures with real-time temperature correction.

1. Паяльные станции с горячим пинцетом для поверхностного монтажа YIHUA938D/938BD+/усовершенствованная 938BD+
3. Parallel electric tweezers design, very convenient for small electronic components, chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

Термовоздушные паяльные станции (2 в 1)

2. Универсальные паяльные станции (2 в 1)The air gun with the service life of 20,000 hours is in compliance with the standard of brushless fan. It offers a large amount of soft wind which is uniform in speed.
2. Паяльные станции для высокоточной пайкиOur precision type 2 in 1 soldering rework station is multifunctional equipment which consists of air gun and soldering iron.
2. Многофункциональные ремонтные паяльные станцииThe functional type 2 in 1 soldering rework station has fast temperature increasing rate. It only requires 10 seconds to increase the room temperature from 30℃ to 300℃.
2. Паяльные станции с диафрагменным насосом (2 в 1)Made of silicone, the air pipe applied to the air gun handle of diaphragm pump type 2 in 1 soldering rework station, has good flexibility, and withstands high temperature.

Термовоздушные паяльные станции (3 в 1)

2. Паяльная станция с термовоздушным пистолетом и паяльником 853D 5A-II Equipped with soldering iron, hot air gun, power supply ...
2. Паяльная станция с источником питания YIHUA-853DA/853D/853D+ It has a dual LED display to show the temperature of hot air gun and electric soldering iron.
2. Паяльная станция с поглотителем паяльного дыма YIHUA-968DB+/968DA+ The soldering iron has the smoke absorption function.
2. Паяльные станции с дымоуловителем YIHUA-992DA/992DA+Both the air gun and soldering iron are designed with the -50℃ to +50℃ temperature compensation function.

Термовоздушные паяльные станции

2. Универсальные паяльные станции (2 в 1)Once the handle is not placed on the rack, the machine unit couldn’t detect the safety command.
2. Интеллектуальные паяльные станцииIts air gun handle is designed with safety protection function. Each time when power on, the equipment couldn’t start work properly until the handle has been placed on the rack.
2. Паяльные станции с диафрагменным насосом (2 в 1)Handle wind tube of the equipment is made of silicone material. That means the tube is flexible, and resistant to high temperature.
2. Портативная паяльная станцияThe portable hot air gun uses a PID programmable temperature microcontroller in order to track the hot air gun’s temperature in real time in a rapid 200ms cycle.

Паяльные станции для бессвинцовой пайки

2. Высокочастотные паяльные станции YIHUA-900H The soldering station has the power of 90W. It only requires several seconds for the temperature rising from 0℃ to 300℃.
2. Паяльные станции с постоянной температурой YIHUA-936 Our equipment applies the high quality ceramic heater which will not be twisted off and can be used for a long time.
2. Паяльные станции с постоянной температурой YIHUA-936A,YIHUA-937D+ It is equipped with the imported high-power heater.
2. Паяльные станции с постоянной температурой YIHUA-936B It won’t result in any damage to the delicate component, as the result of the anti-static design.
2. Паяльные станции с постоянной температурой и цифровым дисплеем YIHUA-937D The anti-static design puts an end to the damage to the delicate components.
2. Паяльные станции с постоянной температурой и цифровым дисплеем YIHUA-939,YIHUA-939D This constant temperature digital soldering station suits to all kinds of environmental extremes.
2. Паяльная станция с постоянной температурой YIHUA-937BD+/939BD+ Equipped with the high-power Hakko heater, it is suitable for all the desoldering applications, especially those large, complicated solder joints.
2. Антистатические паяльные станции YIHUA-942SAMSUNG SCM, PID program are applied for the real-time tracking, correcting the air gun air inlet temperature and soldering iron tip temperature.
2. Высокочастотные паяльные станции YIHUA-950A buzzer has been installed inside the rework station.
2. Портативные паяльные станции YIHUA-9936It applies integrated design with high-efficient switching power supply and power control system.
2. Паяльные станции с ЖК-экраном и защитой от статического электричества YIHUA938/938D+/усовершенствованная 938D+Large-screen LCD display clearly shows the readings.

Ремонтные паяльные станции для BGA корпусов

2. Станции предварительного нагрева серии BGA YIHUA-853A/946BIHUA-853A/946A/946B series BGA preheating station is madewith the anti-static design.
2. Паяльные станции для BGA корпусов YIHUA-853AA,YIHUA-853AAAYIHUA-853AA,YIHUA-853AAA BGA rework station is 2 in1 BGA rework equipment integrated with the preheating station and hot air gun.
2. Инфракрасные паяльные станции для BGA корпусов YIHUA-1000A,YIHUA-1000BBased on the market demand andlatest technological design, the YIHUA-1000A ...
2. Программируемые/не программируемые паяльные станции BGA серии YIHUA 993D/993D+Using the touch-screen design, easy to use and quick fashion.

Антистатический паяльник-выжигатель

2. Паяльники с регулируемой температурой YIHUA-907/908YIHUA907 adjustable temperaturesoldering iron is made with the exquisite patented design. It applies the newenvironment materials which is highly transparent. This soldering device haspositive transparent and back scrub.
2. Паяльники с регулируемой температурой и подставкой YIHUA-926Adjustable temperature range: 200℃-500℃
  Power: 35W, 45W, or 60W.
  YIHUA-926 table top adjustabletemperature soldering iron uses
2. Паяльники YIHUA-800/900IHUA-800/900 series electricsoldering iron is comprised of high temperature plastic, stainless steelcasing, and other components.
2. Электронный паяльник YIHUA 947Паяльник серии YIHUA 947 имеет изысканный запатентованный дизайн, при производстве используется новый экологически чистый высокопрозрачный материал.
2. Паяльники YIHUA908+/908D/908D-IIYihua908+ anti-static heated iron, temperature control using the latest advanced temperature control circuit, precise temperature control.

Блоки питания постоянного тока

2. Блоки питания постоянного тока 15ВThe laboratory testing equipment is provided with USB data interface and system recovery interface.
2. Блоки питания постоянного тока 30ВAs a single output precision DC power unit, YIHUA-3010D DC power supply offers output voltage and current that are continuously adjustable within the rated range.
2. Блоки питания постоянного тока 60ВYIHUA-602D DC power supply is a single output precision DC power device, which provides output voltage and output current that are continuously adjustable within the rated ranges.

1. Аксессуары для пайки
3. The air gun nozzle is suitable for all pump type and fan type long tube gun handles.
  YIHUA wash-free solder wire weighs 50g to 500g. Its diameter range is from 0.3mm to 1.0mm.

Требуются дистрибьюторы